即时比分007

    <address id="fjfzf"><form id="fjfzf"></form></address>

    <address id="fjfzf"></address>
    <noframes id="fjfzf"><address id="fjfzf"><listing id="fjfzf"></listing></address>
    <noframes id="fjfzf"><form id="fjfzf"></form>

    <noframes id="fjfzf">

    <address id="fjfzf"></address>
      <noframes id="fjfzf">
      <form id="fjfzf"></form>
      <form id="fjfzf"><nobr id="fjfzf"><progress id="fjfzf"></progress></nobr></form>

        <noframes id="fjfzf">

        Moldmaking & Casting Materials
        Ph. 561-588-1001



        Moldmaking
        Rubbers and
        Materials
        Moldmaking Rubbers
        Casting Resin
        Shelf Life Extender
        Mold Releases
        Urethane Rubbers
        Silicone Rubbers
        Polyurethane Casting Resin
        Poly-Purge Gas Blanket Spray
        Waxes
        PVA
        Aerosols

        View our MOLD RELEASES.......................>>

        Polyurethane RTV Mold Rubber
        The 74-30 is the softest of our RTV rubbers. These rubbers can be used for making
        durable, easy releasing molds for casting gypsum plasters, waxes, cement, epoxy resins
        polyester resins along with urethane and acrylic. Proper
        mold release is needed to
        insure easy parting from the mold.

        74-30 RTV Liquid Urethane
        Mold Rubber
        Mixed 1 Part A to 1 Part B
        Working Time: 30 Minutes
        Demold Time: 24 Hours
        Hardeness, Shore A: 30

        Info: Our softest polyurethane. Fairly soft and stretchable. Good for molds with complex shapes or detail that might require an easily flexible rubber.

        Mold Release Info: For releasing this rubber from a smooth non-porous original/plug an aerosol such as Poly-2300 or Stoner is suitable. Porous objects such as plaster, concrete or wood should first be sealed to create a smooth surface from which to apply the mold release.

        74-30 Is Available in 2 Part Kits
        Cat No.
        Description
        Price
        POLY-74301
        16oz Kit (8oz A + 8oz B)
        $15.00
        POLY-74302
        32oz Kit (2 LBs)
        $25.00
        POLY-74303
        2 Quart Kit (4 LBs)
        $42.00
        POLY-74304
        1 Gallon Kit (8 LBs)
        $70.00
        POLY-74305
        2 Gallon Kit (16 LBs)
        $114.00
        POLY-74306
        10 Gallon Kit (80 LBs)
        $430.00

        Kit sizes above show total volume included in kit
        with total weight in parentheses.


        Product Data Sheets
        74-30 Product Bulletin

        74-30 Part A-- MSDS
        74-30 Part B-- MSDS

        75-60 RTV Liquid Urethane
        Mold Rubber

        Mixed 1 Part A to 1 Part B
        Working Time: 15 Minutes
        Demold Time: 12 Hours
        Hardness, Shore A: 60

        Info: A medium hardness polyurethane. Similar in hardness to a pencil eraser. The cured rubber will flex but has very little stretchability.

        Mold Release Info: For releasing this rubber from a smooth non-porous original/plug an aerosol such as Poly-2300 or Stoner is suitable. Porous objects such as plaster, concrete or wood should first be sealed to create a smooth surface from which to apply the mold release.

        75-60 Is Available in 2 Part Kits
        Cat No.
        Description
        Price
        POLY-75601
        16oz Kit (8oz A + 8oz B)
        $15.00
        POLY-75602
        32oz Kit (2 LBs)
        $25.00
        POLY-75603
        2 Quart Kit (4 LBs)
        $42.00
        POLY-75604
        1 Gallon Kit (8 LBs)
        $70.00
        POLY-75605
        2 Gallon Kit (16 LBs)
        $114.00
        POLY-75606
        10 Gallon Kit (80 LBs)
        $430.00

        Kit sizes above show total volume included in kit
        with total weight in parentheses.

        Product Data Sheets
        75-60 Product Bulletin

        75-60 PART A -- MSDS
        75-60 PART B-- MSDS

        75-80 RTV Liquid Urethane Mold Rubber
        Mixed 2 Parts A to 1 Part B
        Working Time: 45 Minutes
        Demold Time: 24 Hours
        Hardness, Shore A: 80

        Info: A very hard polyurethane rubber. Very close in hardness to a car tire. Best for flat molds with minimal detail. Also can be used for certain concrete stamping applications.

        Mold Release Info: For releasing this rubber from a smooth non-porous original/plug an aerosol such as Poly-2300 or Stoner is suitable. Porous objects such as plaster, concrete or wood should first be sealed to create a smooth surface from which to apply the mold release.

        75-80 Is Available in 2 Part Kits
        Cat No.
        Description
        Price
        POLY-75801
        24oz Kit (16oz A + 8oz B)
        $21.75
        POLY-75802
        48oz Kit (3 LBs)
        $37.25
        POLY-75803
        3/4 Gallon Kit (6 LBs)
        $60.50
        POLY-75804
        1 1/2 Gallon Kit (12 LBs)
        $97.50
        POLY-75805
        3 Gallon Kit (24 LBs)
        $166.50
        POLY-75806
        15 Gallon Kit (120 LBs)
        $620.00

        Kit sizes above show total volume included in kit
        with total weight in parentheses.

        Product Data Sheets
        75-80 Product Bulletin

        75-80 PART A -- MSDS
        75-80 PART B-- MSDS

        75-90 RTV Liquid Urethane Mold Rubber
        Mixed 2 Parts A to 1 Part B
        Working Time: 10 to 15 Minutes
        Demold Time: 24 Hours
        Hardness, Shore A: 90

        Info: 75-90 is our hardest and strongest polyurethane rubber. It is used for making tough, durable molds, liners and stamps for casting, forming and texturing concrete. This firm rubber is also popular for making industrial parts, rollers, gaskets, bumbers, pads, and more.
        If tinting this rubber is desired, we sell a selection of tinting colors here:
        COLORED PIGMENTS

        Mold Release Info: For releasing this rubber from a smooth non-porous original/plug an aerosol such as Poly-2300 or Stoner is suitable. Porous objects such as plaster, concrete or wood should first be sealed to create a smooth surface from which to apply the mold release.

        75-90 Is Available in 2 Part Kits
        Cat No.
        Description
        Price
        POLY-75901
        24oz Kit (16oz A + 8oz B)
        $23.00
        POLY-75902
        48oz Kit (3 LBs)
        $39.00
        POLY-75903
        3/4 Gallon Kit (6 LBs)
        $63.50
        POLY-75904
        1 1/2 Gallon Kit (12 LBs)
        $102.50
        POLY-75905
        3 Gallon Kit (24 LBs)
        $175.00
        POLY-75906
        15 Gallon Kit (120 LBs)
        $685.00

        Kit sizes above show total volume included in kit
        with total weight in parentheses.

        Product Data Sheets
        75-90 Product Bulletin

        75-90 PART A -- MSDS
        75-90 PART B-- MSDS


        Polygel 35
        Self Thickening RTV Liquid Urethane Rubber For Brush-On Molds
        Polygel mold rubbers consist of two liquids, Part A and Part B which after mixing immediately gel to a brushable or trowellable consistency, then cure overnight at room temperature to a flexible, tough RTV rubber. They are ideal for molds built up with a brush, spatula or spray, Polygel mold rubbers are recommended for evaluation as a mold material for plaster, cement and waxes, as well as for limited casting with polyester epoxy and polyurethane resins.

        Poly Gel 35
        Mixed 1 Part A to 1 Part B
        Hardness, Shore A: 35
        Working Time: 8 to 10 Minutes
        Demold Time: 24 Hours

        Info: A self-thickening brushable mold rubber. Used primarily for blanket molds. Usually requires a mother mold backing to support the mold after it is made. Plaster or fiberglass and resin are commonly used for mother molds.

        Available in 2 Part Kits
        Cat No.
        Description
        Price
        POLY-GEL351
        16oz Kit (8oz A + 8oz B)
        $15.25
        POLY-GEL352
        32oz Kit (2 LBs)
        $25.50
        POLY-GEL353
        2 Quart Kit (4 LBs)
        $42.50
        POLY-GEL354
        1 Gallon Kit (8 LBs)
        $71.00
        POLY-GEL355
        2 Gallon Kit (16 LBs)
        $120.00
        POLY-GEL356
        10 Gallon Kit (80 LBs)
        $483.00


        Product Data Sheets
        PolyGel 35 Product Bulletin

        PolyGel35 Part A -- MSDS
        PolyGel35 Part B-- MSDS



        TinSil 70 Series RTV Silicone Mold Rubbers
        Consists of a liquid Part B base and Part A accelerator which after mixing at the proper ratio by weight, cure at room temperature to a flexible high tear strength RTV silicone rubber. All TinSil 70 Series mold rubbers are tin-catalyzed, condensation-cure systems. They are ideal for molds where easy release or high temperature resistance is needed. They are recommended for evaluation as mold materials for polyester, epoxy and polyurethane resins and waxes. Mold release is not required for casting parts in silicone molds. A mold release wax may be needed when pouring the liquid silicone rubber onto a porous substrate such as wood or plaster. Should not be used with silicone based releases or lubricants.
        70-25 Tin-Sil
        RTV Silicone Mold Rubber

        Mixed 10 parts B to 1 part A
        Hardness, Shore A: 25
        Pour Time: 60 min.
        Demold Time: 24 Hours
        Cured Color: Light Blue

        Info: A very soft and stretchable silicone rubber. No mold release is required, however when making a mold from a porous surface such as wood the surface should be sealed or painted to avoid possible sticking.

        Available in 2 Part Kits
        Cat No.
        Description
        Price
        POLY-70251
        16oz Kit (1LB)
        $ 26.50
        POLY-70252
        32oz Kit (2LB)
        $ 41.00
        POLY-70253
        Gallon Kit (9LB)
        $ 123.00
        POLY-70254
        5 Gallon Kit (44LB)
        $ 421.00


        Product Data Sheets
        70-25 Product Bulletin

        Tinsil 70 Series -- MSDS

        70-60 Tin-Sil
        RTV Silicone Mold Rubber

        Mixed 20 parts B to 1 part A
        Hardness, Shore A: 60
        Pour Time: 30 min.
        Demold Time: 24 Hours
        Cured Color: Red

        This mold rubber is well suited for casting low-temperature melting metals such as pewter. This rubber has a lower tear strength compared to the 70-25 but can withstand higher temperatures upto 400 degrees.

        Info: A more rigid silicone rubber similar to the hardness of a pencil eraser. No mold release is required, however when making a mold from a porous surface such as wood the surface should be sealed or painted to avoid possible sticking.

        Available in 2 Part Kits
        Cat No.
        Description
        Price
        POLY-70601
        1LB Kit
        (approx. 1 Pint)
        $ 28.00
        POLY-70602
        2LB Kit
        (approx. 1 Quart)
        $ 43.00
        POLY-70603
        8.4LB Kit
        (approx. 1 Gallon)
        $ 123.00
        POLY-70604
        42LB Kit
        (approx. 4-1/2 gallons)
        $ 449.00


        Product Data Sheets
        70-60 Product Bulletin

        Tinsil 70 Series -- MSDS

        Poly Latex 60
        One Part Brush-On Rubber for Casting Plaster, Concrete, and Some Resins.

        Built up in multiple layers with thin coats. Previous layers must be allowed to cure before recoating.
        Poly Latex 60
        Cat No.
        Description
        Price
        POLY-L603
        5 Gallon (40 LBs)
        $205.00

        Please Note: Poly Latex is capable of freezing at low temperatures (below 45F). We do not recommend shipping by UPS Ground during winter months.

        Product Data Sheets
        Latex 60 Product Bulletin

        Latex 60 -- MSDS


        Hydrogel-Alginate
        Mixed 3 Parts Water to 1 Part Hydrogel By Weight.
        • Easy to Use, Just Add Water
        • Variable Working Time
        • Non-Toxic, OK-for Body Casts
        • Early Strength for Fast Demold

        DESCRIPTION: Hydrogel® is a dry white powder which when mixed with water at a 3 parts water to 1 part Hydrogel® weight ratio (approximately 1 water to 1 1/4 Hydrogel® by volume) yields a creamy mix with a 5 minute working time. Demolding can be done, with care, several minutes after mix can no longer be worked.
        Mold Release: Use petroleum jelly for skin contact or
        Poly-2300 aerosol spray for industrial parts.

        Available in Pound Increments
        Cat No.
        Description
        Price
        POLY-HYD01
        1 LB Tub
        (approx 1/3 gallon)
        $ 14.50
        POLY-HYD02
        2 LB Tub
        (approx. 3/4 gallon)
        $ 25.00
        POLY-HYD12
        12.5 Pound Pail
        (approx. 5 gallons)
        $ 116.00


        Product Data Sheets
        Hydrogel Product Bulletin

        Hydrogel -- MSDS

        Easy-Flo 60
        Low-viscosity polyurethane casting resin.
        • 2.5 Minute pot life
        • 30 Minute Demold Time.
        • Cured Color: White/Off-White

        This fast setting casting resin creates a hard yet strong plastic for many uses.

        It can be tinted with any of our
        colored pigments, however color will be offset by the natural white color of the product.

        Extremely fluid for all types of casting.
        Favorable strength and low-brittleness.

        No Mold release is necessary for casting into silicone molds.
        Pol-Ease 2300 should be used as a release from polyurethane molds.

        Sold in 2 Part Kits : Mixed 1 to 1
        Cat No.
        Description
        Price
        POLY-EF601
        16oz Kit
        $ 12.95
        POLY-EF602
        32oz Kit
        $ 22.25
        POLY-EF603
        2 Quart Kit
        $ 35.50
        POLY-EF604
        1 Gallon Kit
        $ 58.50
        POLY-EF605
        2 Gallon Kit
        $ 103.00
        POLY-EF606
        10 Gallon Kit
        $ 397.00

        Kit sizes above show total volume included.

        Product Data Sheets
        Easy Flo 60 Product Bulletin

        EasyFlo 60 -- MSDS

        Plasteline Clay
        Plasteline clay is a non-drying, non-hardening, no-sulfur modeling clay for a variety of applications. It is non-toxic, sanitary, and odorless. This clay is easy to handle and work with and remains hand-pliable at room temperature. Keeps its smooth, firm consistency and retains the shape into which it is molded. Has many uses for sculpting, shaping or moldmaking

        Pale green in color
        Each 2LB Block is approx: 5" x 2.5" x 2.5" in size.
        Cat No.
        Description
        Price
        KLY-02
        2 LB Block
        $8.00/Block
        KLY-50
        40 LB Pack (40lbs)
        $143.00


        MSDS
        Klean Klay -- MSDS

        Poly-Purge
        Aerosol Dry Gas Blanket for extending the life of polyurethane rubbers.
        Usage:
        Poly Purge can be sprayed into an open container just before resealing the lid to displace moist air, thus extending the life of polyurethane liquids. Poly Purge is heavier that air and is nonflammable and non-ozone depleting. It is packaged in an aerosol-type can for directing the gas into the desired space.

        Sold by the can or by the case of 12 cans
        Cat No.
        Description
        Price
        POLY-P10
        10oz Can
        $ 14.50
        POLY-P10CSE
        Case of 12 Cans
        $ 150.00


          <address id="fjfzf"><form id="fjfzf"></form></address>

          <address id="fjfzf"></address>
          <noframes id="fjfzf"><address id="fjfzf"><listing id="fjfzf"></listing></address>
          <noframes id="fjfzf"><form id="fjfzf"></form>

          <noframes id="fjfzf">

          <address id="fjfzf"></address>
            <noframes id="fjfzf">
            <form id="fjfzf"></form>
            <form id="fjfzf"><nobr id="fjfzf"><progress id="fjfzf"></progress></nobr></form>

              <noframes id="fjfzf">

              culture

              news

              search for

              Premier League

              image

              news

              reading

              aviation

              aviation